Increase
(330 Deg. Maximum) |
 |
|
Decrease
(40 Deg. Minimum) |
 |
| 1.) Check lock pin position. If needed, turn pin left to "A" (Adjust). |
 |
|
1.) Check lock pin position. If needed, turn pin left to "A" (Adjust). |
|
| 2.) Estimate arc increase required to meet right border. |
 |
|
2.) Turn nozzle to right side of arc. |
 |
| 3.) Turn nozzle counterclockwise to left end of arc. |
 |
|
3.) Press nozzle down to engage internal arc adjuster (gap removed). While pressing down, turn nozzle counterclockwise to decrease arc. Pull nozzle up and release. |
 |
| 4.) Press nozzle down to engage internal arc adjuster (gap removed). While pressing down, turn nozzle clockwise to add required arc. Pull nozzle up and release. |
 |
|
4.) Check new arc. Adjustment made in step 3 will decrease right side of arc. |
 |
| 5.) Check new arc. Adjustment made in step 4 will be added to right side of arc. |
 |
|
5.) When adjustment is correct, turn lock pin clockwise to "L" (Lock). |
 |
| 6.) When adjustment is correct, turn lock pin clockwise to "L" (Lock). |
 |
|
|
|
| |
|
|
|
|
